CK-16D Dual medium intensity led obstruction light

CK-16D Dual medium intensity led obstruction light

Application:

Widely used in various fields of the Air Force, civilian airports and obstacle free airspace, helipads, iron tower, chimney, ports, wind power plants, bridge and city high-rise buildings where require aviation warning.
Used for between 45m to 105m height.

                                             

Item
Parameter
Model
CK-16D
Operating voltage
AC220V/DC48V
Power consumption
≤15W
Flashing frequency
20 ~ 60times/miu.
Light source
Red LED
Peak light intensity
≥2000cd(±25%)
Beam angle
360° horizontal beam angle
≥3° vertical beam spread
Lifespan
>100,000 hours
Emitting color
Red
Method of synchronization
Same power supply voltage signal mode
Overall size(mm)
210mm×3210mmx185mm
Installation size(mm)
126mmx126mm  4*M10
Ingress protection
IP65
Lightning protection level
10KA
Light controlled sensitivity
100Lux
Operating temperature
-55℃~55℃
Net weight
3.5
Wind load
80m/sec.
















Welcome to contact us : 

Contact Person: Emma Wong
Whatsapp:+86 133425812879
Wechat: 008613342512879
Skype ID: chendongtech1  
    Phone:86-13343512879
Tel:+86-0731-85563265 
Fax:+86-0731-85563365
Website:https://www.cdt-en.com https://www.chendongtech.com

Comments

Popular posts from this blog

ICAO Compliance: LED Heliport Approach Path Indicators (CHAPI Light) & LED Airport Precision Approach Path Indicators ( PAPI Light) ICAO (International Civil Aviation Organization) sets essential safety standards for aviation lighting, including for Heliport Approach Path Indicators (Green/Red/White CHAPI Lights) and Precision Approach Path Indicators (Red/White PAPI Lights). These systems help pilots maintain the correct glide path during approach and landing, improving safety and reducing risk.

Installation & Commissioning of Medium-Intensity Obstruction Lighting System for Transmission Lines Medium-Intensity Type A obstruction lights are white flashing lights used for marking tall structures like transmission towers, especially in areas near flight paths. They emit a light intensity of 2000–20000 candela (cd) and are designed for visibility during day and night.

Wind Turbine Obstruction Lighting System – ICAO/FAA Compliant To ensure aviation safety and comply with international regulations, wind turbines require reliable and efficient obstruction lighting systems. Our Wind Turbine Marking Obstruction Lights are designed specifically for tall structures in remote or coastal areas, where visibility is critical for low-flying aircraft, especially during night or poor weather conditions. Key Features: Energy-Efficient LED Technology Automatic Day/Night Intensity Control Durable & Weatherproof Design Optional GPS Sync & Alarm Relay Output Remote Monitoring & Control Solar / UPS Backup Power Supply for Uninterrupted Operation Whether for single turbines or large-scale wind farms, our obstruction light systems help protect both the infrastructure and the skies above.