Aircraft warning light（AWL)/ Aviation Obstruction light(AOL ) ,heliport lighting

LR-2000III type Airport constant current dimmer LR-2000III  type navigation aid constant current dimmer is a single chip microcomputer controlled thyristor type constant current dimmer, which is specially used for the control of airport runway navigation light series circuit. Compliant specifications and standards ICAO   Airport Design Manual Part V, FAA AC 150/5345-10E  L-828  and  L-829  , MH/T 6010-2017  constant current dimmer Technical data 1) Technical parameters     Table 1-1   rated power  4,5, 7.5, 10, 15, 20, 25, 30kVA Rated input voltage    Single-phase 220V/380V  ±   15% Rated frequency     50Hz  ±  5% Series loop current Rated output current 6.6A Remote control Redundant CAN field bus, MOBUS/RS485, Profibus and parallel bus Mean time between failures More than 20000 hours Brightness level Five adjustable brightness levels Harmonic current The harmonic current of the dimmer is small, which does not a

CDT Heliport FATO/ TLOF Inset light , Blue / Green / White Led Optional , Will install on Dubai Heliport Project Heliport/Airport /Airfield Inset LED TLOF/FATO Omni-directional : 1. suitable for 6.6A airfield lighting circuits. --powered by the use of a constant current regulator (CCR) the same type used for airfield Lighting. 2. suitable for 120V and 240V supply. Aid the safe landing and take-off of aircraft. Touchdown and lift-off area (TLOF) which can be surrounded by a final approach and take-off area (FATO) The size of a TLOF is dependant on the type of helicopter using the pad. the TLOF should be square or rectangular in shape and the minimum length should be the rotor diameter but suggested not less than 15 meters. Green lights should be used to define the TLOF perimeter, with a minimum of 4 lights fixtures per side of the square or rectangle. For more details , Please feel free to Contact : emma@chendongtech.com what'sapp :0086-13342512879 ; Skype: chendongt

Airport Elevated Taxiway Edge Light l  ICAO  "Airport Service Manual" Part  9  "Airport Maintenance Practices" and  FAA  's  AC150/5345-26  "Airport Visual  Aiding  Equipment Maintenance" is the highest standard for on-site installation and maintenance of lamps, this manual is in the process of preparation, a large number Refer to these two standards. l  This specification describes the content is very important, construction workers installing commissioning and prior to use , be sure to read carefully. After correctly understanding all the contents, strictly follow the method specified in the manual to ensure that the product is installed and used correctly and safely. l  The daily maintenance personnel of the airport should do the routine maintenance work in strict accordance with the relevant regulations to ensure that the lamps are in the best working condition. l  Relevant personnel must strictly abide by the safety guidelines. Neve