Airport Elevated Taxiway Edge Light
Airport Elevated Taxiway Edge Light
l ICAO "Airport Service Manual" Part 9 "Airport Maintenance Practices" and FAA 's AC150/5345-26 "Airport Visual Aiding Equipment Maintenance" is the highest standard for on-site installation and maintenance of lamps, this manual is in the process of preparation, a large number Refer to these two standards.
l This specification describes the content is very important, construction workers installing commissioning and prior to use , be sure to read carefully. After correctly understanding all the contents, strictly follow the method specified in the manual to ensure that the product is installed and used correctly and safely.
l The daily maintenance personnel of the airport should do the routine maintenance work in strict accordance with the relevant regulations to ensure that the lamps are in the best working condition.
l Relevant personnel must strictly abide by the safety guidelines. Never touch non-professionals lamp appliances and equipment. In any case, live work should be avoided. Construction or maintenance personnel should have relevant first aid knowledge to prevent emergencies.
2.0 Technical specifications
l Comply with International Organization for Standardization (ISO) standards;
l Comply with Annex 14 of the ICAO ICAO Convention - Airport Requirements.
l Comply with the provisions of the People's Republic of China National Standard GB/T 7256-2005 "General Requirements for Civil Airport Lamps".
l GB / T 3977-2008 "Representation of Colors";
l GB 700 0. 1-2007 "General requirements and tests for lamps ";
l QB/T 3741-1999 "Lighting and chemical overlays, chemical coatings";
l GB / T 2423.17-93 "Basic Environmental Test Procedures for Electrical and Electronic Products";
l AC-137-CA-2015-03 Technical Requirements for Runway and Taxiway Navigation Lights ;
2.1 Use environment
l Altitude does not exceed 25 00 m;
l Ambient temperature -40 ° C ~ + 55 ° C
l exposed to rain, snow, ice, stagnant water and solar radiation ;
2.2 Technical indicators and characteristics
l Power 6 VA / 6.6A ; or 3W / 220V . Power factor greater than 0 .9 ; power factor greater than when using a triac dimmer 0 .8 .
l Current: 2.8A-6.6A , dimmable . It is not dimmable when using a 2 20V power supply .
l Use white LED and optical lens to distribute light, high light utilization and high brightness..
l Body using lightweight aluminum sheet material, special surface treatment, fasteners are made of high quality stainless steel material. The body is light , sturdy and has good corrosion resistance;
l Small size, strong overall wind resistance, can withstand winds of 320km / h ;
l Easy-folding parts are subject to FAA requirements through precision machining , and the performance is stable and reliable;
2.3 Optical properties
The average center light intensity is about 4cd , which meets the requirements of ICAO Annex 14 ;
The above is the light intensity distribution curve such as the runway edge light , and the average light intensity requirement is not less than 2cd .
HUNAN CHENDONG TECH CO., LTD
Address:#4, XinCheng Science and Technology Park, West of Yuelu road to Wanglong road, Yuelu district,Changsha city, Hunan province, China
Tel: +86-0731-85563265 +86-0731-85563165
Fax:+86-0731-85563365
Mobile /what'sapp :0086 13342512879
Comments