CM-17 High Intensity Aviation Obstruction Light type B



CM-17 High Intensity Aviation Obstruction Light type B

Application:Use in more than 150 meters across the Power Tower, stratified sequence flashes to show the height of the tower and the top and bottom of the hanging wires suspended height, played the role of aviation obstruction warning.

Key Feature:
• The house of the light adopts SUS304 stainless steel, the structure is high strength, resistance to corrosion
• Use the optical design of parabolic reflector, the visual range further and angle more accurate.
• Light source adopts high quality xenon tubes which are high brightness with light efficiency 100LM/W, low power consumption, long lifespan up to flash 100,000,000 times.
• Based on the single chip computer control, automatic identification sync signal, do not distinguish the main light and auxiliary light, and also could be controlled by controller.
• Same power supply voltage with synchronous signal, integrate in power supply cable, emliminate the damage by error installation caused.
• Used the photosensitive probe fit for the natural ligh spectrum curce, automatic control light intensity level.
• The circuit of the light has surge protection whose lightning proof ability is In 7.5KA/5 times, Imax 15KA so that the light is suitable to harsh environment.
• Integral structure, protection lever of IP65.
• Ignitability rate UL-94V0, fit for all kinds of industrial situation.
• GPS synchronization function is available.

Parameter
Model
CM-17
Operating voltage
AC220V
Power consumption
≤100W
Flashing frequency
4060times/min.
Light source
LED
Peak light intensity
Background Luminance
Peak Light Intensity
≤50Lux
2000cd±25%
50500Lux
20000cd±25%
500Lux
140000cd±25%
Beam angle
90° horizontal beam angle
3-7° vertical beam spread
Lifespan
100,000,000 times
Emitting color
White
Method of synchronization
Same power supply voltage signal mode
Overall size(mm)
350mm>×202mm×134mm
Installation size(mm)
325mm×70mm - 4*M10
Ingress protection
IP65
Lightning protection level
10KA
Operating temperature
-5555
Net weight
8kg
Wind load
80m/sec.

    





Welcome to contact us : 

Contact Person: Emma Wong
Whatsapp:+86 133425812879
Wechat: 008613342512879
Skype ID: chendongtech1  
    Phone:86-13343512879
Tel:+86-0731-85563265 
Fax:+86-0731-85563365
Website:https://www.cdt-en.com 
https://www.chendongtech.com

Comments

Popular posts from this blog

ICAO Compliance: LED Heliport Approach Path Indicators (CHAPI Light) & LED Airport Precision Approach Path Indicators ( PAPI Light) ICAO (International Civil Aviation Organization) sets essential safety standards for aviation lighting, including for Heliport Approach Path Indicators (Green/Red/White CHAPI Lights) and Precision Approach Path Indicators (Red/White PAPI Lights). These systems help pilots maintain the correct glide path during approach and landing, improving safety and reducing risk.

Installation & Commissioning of Medium-Intensity Obstruction Lighting System for Transmission Lines Medium-Intensity Type A obstruction lights are white flashing lights used for marking tall structures like transmission towers, especially in areas near flight paths. They emit a light intensity of 2000–20000 candela (cd) and are designed for visibility during day and night.

LED PAPI & CHAPI Lights, designed for helipads and airports, illuminate pathways for pilots, enhancing visibility and ensuring precision,ensure safe landings with advanced heliport lighting!