Airfield Lighting System









Comply with Standard:

CAAC: AC-137-CA-2015-01 & 03
SAC: GB/T 7256
ICAO: Annex 14, Volume I
IEC: TS 61827
FAA: AC 150/5345-46 & EB NO.67
NATO: STANAG 3316

Product Specification

LED Inset taxiway side light(8 inch)
Embedded, omnidirectional, blue
Light source : LED light source
Rated power: 3VA
Rated current: 2.8~6.6A
Applications: I, II, III airport taxiway side lights
Minimum life of light source at rated power: 50,000 hours

ICAO: Annex 14 5.3.18.8
FAA: L-861T


Product Feature

● The light adopts American CREE lamp bead as LED light source with high luminous efficiency, long life and low energy consumption.
● The prism is made of optical tempered glass with high strength, good wear resistance, strong impact resistance, surface coating and higher transmittance of over 95%.
● LED color management is very strict, ensuring the consistency of the color of the light;
● The dimming curve of the light is consistent with the change of the halogen light to meet the FAA requirements;
● The power factor is greater than 0.95, which can minimize the interference to the power grid;
● Optional single lamp fault detection function simulates open halogen light when LED is damaged;
● Simple and simple design, more practical, the height of the bulge protruding from the ground is only 6.3 mm;
● The upper cover of the lamp is made of high-quality aluminum, which has good mechanical properties, load carrying capacity and impact resistance;
● The upper cover of the light adopts a smooth transitional arc without sharp angles to protect the aircraft tires from injury;
● The lamp body is made of high-conductivity aluminum alloy material, which makes the heat dissipation performance of the lamp better;
● The lamp body is made of corrosion-resistant aluminum alloy and the surface is anodized. All fasteners are made of stainless steel and are suitable for various environments.
● The overall protection level of the light reaches IP68, and the power supply adopts the glue sealing technology;
● The ambient temperature range is -40 degrees Celsius to +85 degrees Celsius to ensure safe operation in harsh environments;

Comments

Popular posts from this blog

Supplying Aviation lighting Safety Solutions for Wind Turbines – Saudi Arabia. Medium-Intensity Type Obstruction Lighting Systems for Wind turbines, ensuring 24/7 visibility and ICAO-compliant safety. 2,000–20,000 cd flashing output (day & night) Automatic intensity control via photocell GPS-synchronized across the entire wind farm Desert-ready: IP66, UV-resistant, high-temperature endurance LED technology: long-lasting, low-maintenance

500kV Transmission Line Obstruction Lighting System – Solar Powered, 24/7 Reliable Operation High-voltage transmission towers require reliable aviation obstruction lighting to ensure compliance with ICAO/FAA standards and protect aircraft safety. Our solar-powered medium-intensity obstruction lights provide: 🔹 2000–20000cd red/white flashing for day & night marking 🔹 Solar kit with long-life batteries – 120–140 hrs autonomy 🔹 IP66+ weatherproof design for harsh outdoor conditions 🔹 Independent from grid power – ideal for remote 500kV lines A cost-effective, low-maintenance solution ensuring visibility and safety for transmission infrastructure worldwide.

🚨 Medium-Intensity Obstruction Light — Type AB 🚨 For safe marking of towers, cranes, chimneys, and tall structures, our Type AB aviation obstruction light ensures maximum visibility day and night: ✅ 20,000 cd White Flashing (Daytime) – 2,000 cd Red Flashing (Nighttime) ✅ Automatic Day/Night Switching – via photocell or remote control. ✅ Real-Time Monitoring System – live working status, fault alarms, and remote control access. ✅ Durable & Reliable – IP66 weatherproof, corrosion-resistant, >100,000 hrs LED lifetime. used for telecom towers, transmission lines, wind turbines, chimneys, and high-rise projects.