GSM telecom tower / transmission power line /Tower crane/ Wind turbine Aircraft warning lights , Compliant ICAO avaiation obstruction lights system

For more information
www.cdt-en.com
emma@chendongtech.com
what'sapp :+86 13342512879

FAA L810& ICAO Standards LED Aviation Obstruction Lights Low Intensity Aircraft Warning Light use for Below 45m Height

Low Intensity Solar Warning Lights (LIOL) with solar panel, multi LED type. In compliance with ICAO Annex 14 Type A, Type B and FAA L-810. As specified by Annex 14 of ICAO regulations, Low Intensity Obstruction Light can be used to warn the presence of obstacles up to 45m height, such as telecommunication towers, wind turbines, chimneys, cranes, buildings and other structures.This beacon is the simplest device according to ICAO standards. It provides steady burning red light with two types of intensity: ≥10cd for Type A, ≥32cd for Type B and≥32cd for Type E (flashing red light). In particular, the Low Intensity Lights with solar panelare used for night-time signalisation where the power supply does not arrive or where it is very weak.

FAA L864/L865/L885 & ICAO Standards LED Solar Aviation Obstruction Lights Medium Intensity Aircraft Warning Light use 45-105m Height

CK-15 Medium Intensity Obstruction Lights (MIOL), red light, multi-LED type. According to ICAO - Annex 14 - Medium Intensity Obstacle Lights Type B or Type C and FAA L-864.
Medium Intensity Obstacle Lights Type B should be used either alone or in combination with Low Intensity Obstacle Lights Type B for night mode, whereas Medium Intensity Obstacle Lights Type C should be used either alone or in combination with Medium Intensity Obstacle Lights Type AC for daily and night mode where the obstacle is particularly large and the height of the surrounding soil is more than 45m.

FAA L856 / L857 & ICAO Standards LED Aviation Obstruction Lights High Intensity Aircraft Warning Light use Above 150m Height

High Intensity Obstacle Light Type B (90°), multi-LED type. The High Intensity Obstruction Light is compliant to ICAO (Type B) and FAA (Type;L-857). High Intensity Obstruction Lights are used to indicate the presence of structures whose height above the level of the surrounding ground exceeds 150m.

OPTIONS
* Infrared version
* Stainless Steel Beacon support bracket

* Solar Powered