ICAO Annex 14 FATO & TLOF , 110-240VAC & DC option ,8" Omini directional emitting flush mounted Heliport Inset perimeter light marking edge FATO & TLOF area.

ICAO Annex 14 FATO & TLOF , 110-240VAC & DC option ,8" Omini directional emitting flush mounted Heliport Inset perimeter light marking edge FATO & TLOF area.

Heliport/Airport /Airfield Inset LED TLOF/FATO Omni-directional :

1. suitable for 6.6A airfield lighting circuits. --powered by the use of a constant current regulator (CCR) the same type used for airfield Lighting.

2. suitable for 120V and 240V supply.

Aid the safe landing and take-off of aircraft. Touchdown and lift-off area (TLOF) which can be surrounded by a final approach and take-off area (FATO) The size of a TLOF is dependant on the type of helicopter using the pad. the TLOF should be square or rectangular in shape and the minimum length should be the rotor diameter but suggested not less than 15 meters. Green lights should be used to define the TLOF perimeter, with a minimum of 4 lights fixtures per side of the square or rectangle.

emma@chendongtech.com
what'sapp :0086-13342512879

Skype: chendongtech1

Saudi Arabia Heliport lighting project

Key Feature

Model	CM-HT12/D
Operating voltage	AC220V/6.6A
Power Consumption	≤15W
Light Intensity	100cd
Light Source	White
Light Lifespan	100,000 Hours
Emitting Color	WhiteBlue/Yellow/Green
Ingress Protection	P68
Environment Humidity	0-100%
Altitude	≤2500m
Environment Temperature	-40℃～55℃
Wind Load	80m/s