500 kV Transmission Line – Solar Medium-Intensity Aviation Obstruction Light (Type A) White flashing, 2,000–20,000 cd | 24-hour operation | Solar powered | Middle-Top-Bottom sequence Solar medium-intensity obstruction lighting system engineered for 500 kV transmission towers. The system delivers white flashing light with adjustable effective intensity from 2,000 to 20,000 cd, operating 24 hrs (day/twilight/night) and using a middle → top → bottom sequential flashing pattern for clear tower delineation.

500 kV Transmission Line – Solar Medium-Intensity Aviation Obstruction Light (Type A) 

White flashing, 2,000–20,000 cd | 24-hour operation | Solar powered | Middle-Top-Bottom sequence 

Solar medium-intensity obstruction lighting system engineered for 500 kV transmission towers. The system delivers white flashing light with adjustable effective intensity from 2,000 to 20,000 cd, operating 24 hrs (day/twilight/night) and using a middle → top → bottom sequential flashing pattern for clear tower delineation. 

 Key Features 

  •  Type A white flashing: 2,000–20,000 cd effective intensity range. 
  •  Sequential beacons: Middle → Top → Bottom flash sequence to define tower height and profile. 
  •  24/7 operation: Light-level auto switching for day/twilight/night modes. 
  •  All-solar system: High-efficiency panel, deep-cycle battery, MPPT controller for continuous operation. 
  •  Low maintenance: Long-life LEDs (≥100,000 hrs) with over-voltage and reverse-polarity protection. 
  •  Weatherproof & robust: IP66 (lamp), corrosion-resistant housing, vibration-resistant for lattice towers. 
  • Smart control: Programmable flash rate; GPS sync or wired sync optional across multiple towers. 
  • Compliance-ready: Designed to meet ICAO Annex 14 and FAA AC 70/7460-1 recommendations for medium-intensity white obstruction lighting (Type A).

 Typical Application 

 Marking of 500 kV transmission lines and angle/dead-end towers in open terrain, river crossings, and approach corridors.


More detaisl

Emma@chendongtech.com

what'sapp: +86 13342512879









Comments

Popular posts from this blog

ICAO Compliance: LED Heliport Approach Path Indicators (CHAPI Light) & LED Airport Precision Approach Path Indicators ( PAPI Light) ICAO (International Civil Aviation Organization) sets essential safety standards for aviation lighting, including for Heliport Approach Path Indicators (Green/Red/White CHAPI Lights) and Precision Approach Path Indicators (Red/White PAPI Lights). These systems help pilots maintain the correct glide path during approach and landing, improving safety and reducing risk.

Installation & Commissioning of Medium-Intensity Obstruction Lighting System for Transmission Lines Medium-Intensity Type A obstruction lights are white flashing lights used for marking tall structures like transmission towers, especially in areas near flight paths. They emit a light intensity of 2000–20000 candela (cd) and are designed for visibility during day and night.

Wind Turbine Obstruction Lighting System – ICAO/FAA Compliant To ensure aviation safety and comply with international regulations, wind turbines require reliable and efficient obstruction lighting systems. Our Wind Turbine Marking Obstruction Lights are designed specifically for tall structures in remote or coastal areas, where visibility is critical for low-flying aircraft, especially during night or poor weather conditions. Key Features: Energy-Efficient LED Technology Automatic Day/Night Intensity Control Durable & Weatherproof Design Optional GPS Sync & Alarm Relay Output Remote Monitoring & Control Solar / UPS Backup Power Supply for Uninterrupted Operation Whether for single turbines or large-scale wind farms, our obstruction light systems help protect both the infrastructure and the skies above.