Aircraft warning light（AWL)/ Aviation Obstruction light(AOL ) ,heliport lighting

Design guidelines for Aviation obstruction lightings system at telecom GSM towers Help developers, project engineers and designers when considering the installation of obstruction lighting for a telecom ,GSM tower . below proposal aviation obstructiong lighting system installation as followings :    Guidelines : (60-90-100M telecom tower ) As per the diagram below, one L864 beacons medium intensity type b aviation obstruction light installed on the top, and two L810 side lights low intensity type b aviation obstruction light installed on the tower at mid-height. The side lights steady burning , the top lights flashing 20-40fpm  FAA L810, ICAO Standards LED Low Intensity Aircraft Warning Light use for Below 45m Height Low Intensity Solar Warning Lights (LIOL) , solar powered optional, multi LED type. In compliance with ICAO Annex 14 Type A, Type B and FAA L-810. As specified by Annex 14 of ICAO regulations, Low Intensity Obstruction Light can be used to warn the presence ...

Conductor marking lights are a particular type of aircraft warning lights designed for overhead power lines ,transmission line catenary wires near airports/ heliports, across rivers to increase night conspicuity . Conductor Marking Lights Night time warning lights should be fitted to phase conductors in flight path of low flying aircrafts. These should be operated by induced currents from the phase conductor and conform to (ICAO) international civil aviation organization and (FAA) Federal aviation authority requirements for light output and visibility. Average life of 25,000 hours. Conform to the corona and radio interference requirements of other line hardware. More Info: emma@chendongtech.com what'sapp:+86 13342512879

100cd LED Aircraft Warning Light Item Name Aviation Obstruction Beacon Model CM-11 Operating Voltage AC110-240V/DC12-48V Power consumption ≤5W Flashing frequency Steady-Burning Light intensity 10cd/32.5cd/100cd Life span ＞100,000 hours Emitting color RED Beam angle 360° horizontal,more than 10° vertical beam spread Method of synchronization Same power supply voltage signal mode Overall size ∅175mm×220mm Installation size Φ130-4*M10 Ingress protection IP65 Environment humidity 0%-95% Operating temperature -40℃～55℃ Net weight 1.5KG Wind load 80m/sec. Specification The lampshade is made of UV (UV) resistant PC (polycarbonate) material with a transparency of over 95%. It has flame retardant, non-toxic, excellent electrical insulation, dimensional stability, corrosion resistance, high temperature resistance and cold resistance. The lamp base is characterized by high strength, corrosion resistance and aging resistance. Reflector based on the principle of reflection, the light utilization rat...